Development of pneumatic robot arm controller fori industrial application

Udawatta, UKDLP

UoM IR
→
Research Publications
→
University of Moratuwa Research – Reports
→
Senate Research Committee – Reports
→
View Item

dc.contributor.author	Udawatta, UKDLP
dc.date.accessioned	2013-11-07T14:02:08Z
dc.date.available	2013-11-07T14:02:08Z
dc.date.issued	2013-11-07
dc.identifier.uri	http://dl.lib.mrt.ac.lk/handle/123/8874
dc.description	This research study focuses on developing a pneumatic robot arm for industrial applications, where the discussion is narrowed down to the application of Pneumatic Artificial Muscles (PAM) on bicep configuration. When compared with other robotic actuators Pneumatic muscles have several advantages such as lower power to weight ratios, high strength, lightweight and easiness of employment. Hence pneumatic artificial muscles have become more attractive actuators in industrial robotics applications. A pneumatic muscle analysis was carried out with the help of practical results which were obtained with a prototype experiment. It was realized that the muscle behaves in a non-linear manner which is the main disadvantage. The system equation is linearised in order to derive the state space model. With this the system would be linearised only within a small range of inputs, where it is impossible to use it as a general model with a whole range of inputs. Even though the above paradigm is discussed for single pneumatic sub-systems, it is emphasized, that the same approach can effectively be extended without any major conceptual breakthrough to any number of muscles. Depending on the application, the pneumatic muscle may require different contraction profiles, where the controlling task of the muscle contraction would be vital. To obtain the desired tracking of the actual performance, Inversion Based Control (IBC) concept has been employed. Simulated results showed the proposed methodology could be effectively applied. Further, investigations need to be carried out to model the complete system with other perturbations and apply the inversion based control concept for precise control of the tip of the arm.	en_US
dc.description.sponsorship	Senate Research Committee	en_US
dc.language.iso	en	en_US
dc.title	Development of pneumatic robot arm controller fori industrial application	en_US
dc.type	SRC-Report	en_US
dc.identifier.department	Electrical Engineering	en_US
dc.identifier.srgno	265	en_US