UoM IR
→
Thesis & Dissertation
→
Faculty of Engineering, Civil Engineering
→
Master of Engineering in Structural Engineering Design
→
Browsing Master of Engineering in Structural Engineering Design by Subject

Browsing Master of Engineering in Structural Engineering Design by Subject "MEng in Structural Engineering Design"

Now showing items 1-13 of 13

Comparative analysis o n simply supported pre- stressed box beams in Sri Lankan highway bridges

Jabbar, MARMA [Thesis-Abstract]

The National Road network of Sri Lanka consists of 4326 bridges. There are 365 bridges which Have the length more than 30m .Only 800 bridges are made of prestressed concrete superstructures and all others are with reinforced ...
Comparison of shell element forces obtained through classical analysis and computer software

Vithanage, SC [Thesis-Abstract]

The “intze” type water tanks are economical for storing large capacities of water. Therefore accurate analysis of these structures is essential. Modern trend is to use computer software for analysis and design of structures. ...
Delayed ettringite formation in large concrete sections and its prevention

Wanigaratne, NSA [Thesis-Abstract]

Delayed Ettringite Formation in Large Concrete Sections and its Prevention With many large scale civil engineering construction projects undertaken, there is a possibility for having large concrete pores in thick members. ...
Effect of high strength concrete for bridge girders

Dissanayake, STB [Thesis-Abstract]

High strength concrete (HSC) has been widely applied worldwide in recent years due to its favorable strength and dense microstructure. HSC shows some characteristics and engineering properties different from those of ...
Evaluation of present safety limits of steel lattice type telecommunication antenna towers in Sri Lanka

Perera, GRV [Thesis-Full-text]

Sri Lanka has made a significant development in the telecommunications sector since the inception of sector reforms in 1991, resulting in a competitive market environment. The results of liberalization have been impressive, ...
Feasibility of using cold formed steel sections for medium span portal frames in Sri Lanka

Ziyath, MAM [Thesis-Abstract]

Cold formed and thin walled steel (CFS) sectional members are used in building industry in many fields around the world. CFS sectional members are combined and used as a primary load bearing members on medium span structures. ...
Optimization of circular ground reservoirs

Wickramasinghe, NRS [Thesis-Abstract]

Ground reservoirs of various types are often used as water storage reservoirs in major water supply schemes. Mainly there are two types of ground reservoirs viz. circular and rectangular. Circular type ground reservoirs ...
Production of self compacting concrete using rice husk ash

Jeevasangar, S [Thesis-Abstract]

Self compacting concrete flows into formwork and around obstructions under its own weight to fill it completely and self compact (without any need for vibration), without any segregation and blocking. The elimination of ...
The response of conventional structures in Sri Lanka for earthquake

Sudesan, N [Thesis-Abstract]

Ground water reservoirs are commonly used in this country for storing 200m3 to 2000m3 water capacities when the area needed water supply having an elevated area (which elevation is sufficient for the head required) and ...
The response of existing conical water towers in Sri Lanka to earthquake

Chandana, DPM [Thesis-Abstract]

The shaft support of elevated conical tanks should have adequate strength to resist axial loads, and moment and shear forces due to lateral loads. These forces depend on the total weight of the structure which varies with ...
Sizing of reinforced concrete structural members based on Sri Lankan design data

Konara, MRN [Thesis-Abstract]

The majority of building structures in Sri Lanka, are of reinforced concrete. Often it is required to estimate structural member sizes at the initial stage of a building construction project for load evaluation, cost ...
Strength assessment of axially loaded RC column strengthened by steel cages

Thenuwara, TATE [Thesis-Abstract]

In reinforced concrete buildings the columns are the main vertical elements, which sustain and carry the entire weight. Hence they should be capable to withstand the loads transferring from the beams and slabs without any ...
Strength assessment of reinforced concrete structures under effect of corrosion

Kurumbalapitiya, KASL [Thesis-Abstract]

Main types of reinforced concrete structures such as buildings, bridges, transmission poles which were built specially in the last century, are reaching end of their life span and need strength assessment for their continuous ...

Now showing items 1-13 of 13

Search UoM-IR

Browse

All of UoM-IR
This Collection
- Authors
- Titles
- Subjects
- Faculty
- Acc. No.
- Document Type
- Year
- Conference Proceedings

Browsing Master of Engineering in Structural Engineering Design by Subject "MEng in Structural Engineering Design"

Browsing Master of Engineering in Structural Engineering Design by Subject "MEng in Structural Engineering Design"

Search UoM-IR

Browse

All of UoM-IR

This Collection

My Account