JavaScript is disabled for your browser. Some features of this site may not work without it.
| dc.contributor.advisor | Rajapakse, R. L. H. L. | |
| dc.contributor.author | Jaman, M | |
| dc.date.accessioned | 2015-10-19T11:10:25Z | |
| dc.date.available | 2015-10-19T11:10:25Z | |
| dc.date.issued | 2015-10-19 | |
| dc.identifier.uri | http://dl.lib.mrt.ac.lk/handle/123/11477 | |
| dc.description.abstract | All over the world, masses of human beings consume water for both potable and non-potable uses. While access to safe drinking water is explicitly acknowledged as a basic human need, water has an economical value in today’s world market. The water crisis and impending climate change impacts highlight the immediate need for adopting alternative solutions to relieve the pressure on conventional water sources and Rain Water Harvesting (RWH) is ascribed as one of the most sustainable, low cost solutions equally applicable to both the urban and rural water management systems. In consideration of ever growing need for water conservation and as a measure in addressing the future issues of sustainable water management, the Government of Sri Lanka (GOSL) has recently implemented policies, rules and regulations to promote rainwater harvesting and one of the technologies recommended by the government is the Roof-top Rainwater Harvesting Systems (RRWHS). However, the initial investment cost for the storage tank is relatively high for rural communities in need and lack of information on tank size selection, cost recovery time, etc., hinder the popularizing and adopting of RRWHS among both rural and urban communities. In this study, an evaluation and assessment of presently existing RRWH practices in Sri Lanka have been undertaken in an attempt to identify the probable reasons that hinder popularising of RRWH among both communities, while a special consideration is given to the design aspects lacking concerns of cost, making RRWHS unaffordable especially to rural communities in need. To investigate the design considerations under the constraints of economical and reliability aspects, the design of storage tank, conveyance system and quality system of RRWHS are considered. Based on the findings of the present study, the estimation of the storage tank size is recommended to be achieved by daily water balance equation method and the excel worksheet model developed in this study was found to be more effective than the mass balance, analytical, and sequent peak algorithm methods presently in practice. The conveyance system is recommended to be designed based on updated rainfall intensity values (from updated IDF curves) and the quality of water harvested can be improved by incorporating a fixed volume first flush diverter. The time for cost recovery estimated based on present tariff for pipe-borne water and average household water use has been recognized as a fact to justify use of RRWH in urban setups, further to other indirect benefits. The recommendations for the best methodologies and possible further improvements are proposed based on the benefits of cost reduction estimated according to the present water consumption rate using present water tariff and calculating the cost recovery period for the RRWH systems. | en_US |
| dc.language.iso | en | en_US |
| dc.type | Thesis-Full-text | en_US |
| dc.identifier.faculty | Engineering | en_US |
| dc.identifier.degree | Master of Engineering in Water Resources Engineering and Management | en_US |
| dc.identifier.department | Department of Civil Engineering | en_US |
| dc.date.accept | 2014-08 | |
| dc.identifier.accno | 109278 | en_US |
| dcterms.title | Rainwater harvesting practices in sri lanka and an investigation on cost effective design considerations for wet and dry zones |
